Tilbage til blog
Vejledninger 2026-11-16 New York Toy Collective 0 visninger

Strop-on sele sæt til begyndere: Samling og første brug

Strop-on sele sæt til begyndere: Samling og første brug

Sæt begynder-sele-dildo-sættet op trin for trin: justér neopren-sele, tilføj skumstabilisator, monter en O-ring, og rengør silikone-legetøjet før og efter brug.

Start with the box, not the toy

The Beginner Strap-On Harness Kit is designed to remove the guesswork: one box contains the adjustable neoprene harness, two O-rings, a foam stabilizer, a poseable silicone toy with a suction cup base, and a bonus bullet vibe while supplies last. The harness has a built-in vibe pocket, so the bullet can sit in place if you use it.

Before you put anything on, lay the parts out and check them against that list. The kit is built to work together, so you do not need to match a harness to a toy or hunt for an O-ring that fits. If a part is missing, stop and contact the store before first use.

What is in the kit

Assemble the harness in four steps

The supplied information describes the parts and their purpose but does not include a numbered assembly diagram. Use these steps as a practical order based on the included components; adjust the order if it is easier for you.

  1. 1. Loosen the straps before you put it on: The neoprene harness has fully adjustable straps. Open them wide enough to step into or pull over your hips, then tighten gradually. The goal is a secure fit without digging in or constant readjusting.
  2. 2. Place the foam stabilizer: The foam stabilizer is included to improve control and reduce shifting. Position it where the toy will sit against your body, then hold it in place as you fit the O-ring.
  3. 3. Choose and fit an O-ring: Two O-rings are included for a secure, compatible fit. Select the one that holds the base of the silicone toy without letting it slip through. The kit uses standard O-rings, so a replacement later will not make the harness obsolete.
  4. 4. Check the vibe pocket if you are using the bullet: The built-in pocket is designed to hold a bullet vibe. If you are using the included bonus bullet, seat it in the pocket before final adjustment so the harness straps sit cleanly over it.

Fit the harness to your body, not a size chart

The harness is described as one size that works for most bodies, with fully adjustable straps. That means fit is set by how you tighten it, not by picking a numbered size. Start with the waist and work outward: a stable waist keeps the toy from pulling the harness down, and the leg straps should be snug enough to stay put without pinching.

Neoprene is soft and forgiving, and the kit is designed so the harness moves with your body instead of fighting it. If you feel pressure points or the harness shifts when you move, loosen and re-tighten one strap at a time rather than overtightening everything. The supplied information does not list a maximum or minimum waist measurement, so use comfort and stability as your guide.

Prepare the silicone toy before first use

The toy is poseable silicone with a suction cup base. Bend it to the angle you want and it holds that position. The suction cup lets you use the toy with or without the harness, so you can try hands-free play on a smooth surface or skip the harness entirely.

The supplied care instructions are simple: wash the toy with warm water and mild soap, then let it air dry. Do that before first use and after each use. The kit record also says water-based lube is the only extra you need; it does not list other lubricant types, so stick with water-based unless the store confirms otherwise.

Silicone toy details that affect setup

Care for the neoprene harness

The harness is spot treat and air dry, according to the supplied care instructions. Wipe it with a damp cloth and let it dry fully before storing it. Do not put the neoprene harness in a washing machine or dryer based on this record; the record does not describe machine washing, so spot cleaning is the supported method.

Store the harness flat or loosely folded with the O-rings and stabilizer together so the kit stays complete. The supplied information does not give a specific storage container or temperature range, so use common sense and keep it dry.

Harness or suction cup: two ways to use the same toy

The kit gives you two setups with one toy. Neither is required; try both to see which feels more natural.

  • Harness setup: Best when you want the toy to move with your body. Fit the O-ring, seat the foam stabilizer, and adjust the neoprene straps for a secure fit. The harness has a built-in vibe pocket if you want to add the bullet.
  • Suction cup setup: Best for hands-free play on a smooth surface. Press the suction cup base down, bend the poseable silicone to the angle you want, and skip the harness entirely. This is also a low-pressure way to get familiar with the toy before adding the harness.

What the kit does not settle

The supplied information does not give exact toy dimensions, a waist measurement range, or a step-by-step diagram for threading the O-ring. It also does not describe how to clean the bullet vibe beyond the harness pocket. If those details matter to you, ask the store before purchase rather than guessing.

The kit is available in Black, Blue, and Purple, with or without an added silicone vibe. The color and vibe choice do not change the assembly steps; they only change what is in the box.

Relaterede artikler

Customer Service
Hjem
Produkter
Kurv
Profil